Quote checker · 20 Florida cities
Is Your Roofing Quote Fair?
Enter what a contractor quoted you and we'll compare it to real local per-square-foot rates, then flag anything a legitimate quote should spell out that yours might be missing — tear-off, decking allowance, and permit language.
How this check works
We take your home's footprint and pitch to estimate roof surface area — the same math as our cost calculator — multiply by your city's researched per-square-foot rate for that material, and compare the result to what you were quoted, with a 10% buffer on each side so a quote right at the edge of typical isn't flagged for no reason. Then we check your quote against the three line items every legitimate Florida roofing quote should spell out; see our full guide to reading a roofing quote for why each one matters.
Why these three checks
Tear-off: Florida allows at most two layers of shingles before a full tear-off is required by code — a quote that skips tear-off on an older roof may be planning to cover over problems that need to be found now.
Decking allowance: Once the old roof is off, some plywood decking is often found rotted or storm-damaged. A quote with no allowance for this either assumes a perfect deck or is planning a surprise change order.
Permit: Florida requires a permit for roof replacement. A contractor who won't put permit handling in writing is a documented red flag for unlicensed or uninsured work.
FAQ
Is this a real inspection of my roof?
No — it's a planning-level check against published local rate data and a basic checklist. It can't see your actual roof condition. Use it to sanity-check a quote before you sign, not instead of an inspection.
My quote came back below range — is that always bad?
Not always, but it's worth a second look. A low bid can mean thinner materials, an inexperienced crew, or scope quietly left out, like tear-off or a full permit. Ask the contractor to walk through exactly what's included before you assume it's a good deal.
What if I don't know my exact roof pitch?
"Average (5/12–7/12)" covers most single-family Florida homes. If your roof looks noticeably steep from the street, try "Steep" instead — it changes the estimate but rarely by more than a few hundred dollars.
Which cities does this cover?
20 verified cities across the Treasure Coast and Palm Beaches — the same coverage as our cost calculator and the city guides below.
City guides
Martin County
St. Lucie County
Indian River County